AquaNatura Water Quality Test Kit 13-in-One

29.990023

UVP EUR 31,99 EUR 29,99

inkl. 19 % USt

Art.Nr. 1001AN

Sofort versandfähig, ausreichende Stückzahl

Lieferzeit 1 Woche

AquaNatura Water Quality Test Kit 13-in-One

AquaNatura Water Quality Test Kit 13-in-One

AquaNatura Water Quality Test Kit 13-in-One

AquaNatura Water Quality Test Kit 13-in-One

AquaNatura Water Quality Test Kit 13-in-One

Mengenrabatt

1-1
EUR 29,99
2-3
EUR 28,99
>= 4
EUR 25,99

AquaNatura Water Quality Test Kit 13-in-One

This Complete Quality Water Test Kit tests water for 13 different parameters, allowing you to identify the issues in your water quality so you will know how to correctly treat your water. This kit tests for: coliform bacteria, nitrate, nitrite, hydrogen sulfide, total hardness, total alkalinity, total chlorine, free chlorine, chloride, copper, sulfate, iron & pH.


Suitable for: fresh water samples, including water from taps, wells, springs, boreholes, ponds as well as rain water


This test kit contains 2 tests for each parameter and 1 test for bacteria - totalling 25 tests.


  • Easy to use kit provides a convenient way to check your water for 13 of the top water quality concerns.
  • Do-it-yourself test kit. Everything needed to perform and analyse the tests is included.
  • The tests are fast and provide you with results right at home in seconds. Bacteria test takes 48 hours.
  • Clear directions, easy methods and top quality non-toxic test ingredients.
  • Requires no technical training, instrumentation, powders, liquids or tablets.
  • EPA*-based, test kit includes:
1 x Bacteria Test, Total Coliform bacteria test with simultaneous E.coli detection, 2 x Free Chlorine Tests, 2 x Nitrate Tests, 2 x Nitrite Tests, 2 x Hardness Tests, 2 x Total Chlorine Tests, 2 x pH Tests, 2 x Total Alkalinity Tests, 2 x Iron Tests, 2 x Copper Tests, 2 x Sulfate Tests, 2 x Chloride Tests, 2 x Hydrogen Sulfide Tests


Because the kit contains 2 tests each (except for bacteria) - it is very suitable to test the effectiveness of your water filtration system. Simply test your water before and after treatment and compare the results, and if unsatisfactory, chose a more suitable process.


*EPA - US Environmental Protection Agency

 


TestSensitivityResult Time
pH2, 4, 5, 6.5, 8.5, 9.5, 10.5, 1225 seconds
Total alkalinity
0, 40, 80, 120, 180, 240, 500 ppm (mg/l)25 seconds
Total hardness
0, 50, 120, 250, 425, 1000ppm (mg/l)25 seconds
Nitrate (as N)0, 2, 10, 20, 50 ppm (mg/l)1 minute
Nitrite (als N)0, 0.2, 1, 1.5, 3 ppm (mg/l)1 minute
Iron (Fe+2)0.0, 0.05, 0.1, 0.3, 1.0 ppm20 seconds
Copper (Cu+1/Cu+2)0.0, 0.1, 0.5, 1.0, 2.0 ppm30 seconds
Hydrogen Sulfide (H2S)0.3, 0.5, 1,2 ppm (mg/l)30 seconds
Chloride0, 250, >500 ppm (mg/l)35 seconds
Sulfate0, 250, >500 ppm (mg/l)30 seconds
Free Chlorine0, 0.05, 0.2, 0.6, 1.5, 4, 10 ppm (mg/l)40 seconds
Total Chlorine
0, 0.2, 1, 4, 10 ppm25 seconds
Coliform bacteria*present/absent, 1 colony per 100ml (1 CFU per 100ml)48 hours


*The bacteria test kit detects total coliform (which is faecal bacteria for the most part), and is a presence/absence test of 1CFU per 100ml. Should the result be positive, then the presence of E.coli can be detected using a blacklight with a wavelength of 365 (it is recommended to use the NVF-4 blacklight).


Please note, that this is a screening test and can not be used to certify water as safe or unsafe for drinking. This test kit provides approximate results ONLY when used in strict accordance with instructions. SimplexHealth expressly disclaims any liability resulting from the use of this product, failure to follow instructions, or reliance of test results.

0 Bewertung(en)

Bewertung schreiben

Kunden kauften auch

AquaNatura Water Total Metals Check (6 Tests)

AquaNatura Water Total Metals Check (6 Tests)

EUR 10,99

inkl. 19 % USt

Empfohlenes Zubehör

AquaNatura Water Bacteria Test - 1 test

AquaNatura Water Bacteria Test - 1 test

EUR 16,99

inkl. 19 % USt